For Sale: DAS AERO 40-A LINE ARRAY SYSTEM
[PRICE SHOWN FOR THE ENTIRE CONTENT OF THIS LISTING]
Listing last update on September 28, 2024 - Viewed 1407 times

DAS DAS AERO 40A (YOM: ?) (S#: TBD) GOOD (7-8) PACKAGE FEATURES:

• 18 X DAS AERO 40A,

WITH

• 1 X DSP 4080 PROCESSOR WITH PATCH PANEL AND RACK
• 4 X PL40S AERO40 METAL CARTS,
• 4 X AERO40 COVERS,
• 6 X AX-AE-40S3 AERO40 FLYBAR/BUMPERS,
• 7 X ETHER-CONN HOMERUN CABLES (750')
• 50 X EC -09 ETHER-CON JUMPERS
• 4 X TRU-CON TO EDISON
• 14 X TRU-CON JUMPERS

MODIFICATIONS:

NO MODS

HISTORY:

ALL ITEMS USED INDOORS ONLY FOR THE LAST 5 YEARS. 

COMMENTS:

• 3 OF THE 18 AERO40A BOXES ARE MISSING THE PROTECTIVE HARD DOLLIES (SEE PHOTOS). THIS DOES NOT AFFECT THE FUNCTIONALITY OF THE PA OR SPEAKERS.

THIS UNIT WAS NEVER TOURED

MORE ABOUT DAS AERO40 LINE ARRAYS PER MANUFACTURER:

THE AERO-40A IS A 3-WAY POWERED LINE ARRAY SYSTEM WHICH INCORPORATES CONNECTIVITY FOR REMOTE MONITORING AND CONTROL. THE UNIQUE CONFIGURATION OF THE AERO-40A ADVANCED LINE ARRAY SYSTEM (ALAS™) INCORPORATES A REAR-LOADED 12” TRANSDUCER IN A BASS-HORN CONFIGURATION FOR LOW-END REPRODUCTION. THE MID-RANGE IS HANDLED BY AN NEW 8” TRANSDUCER DEVELOPED SPECIFICALLY FOR THE AERO-40A. HIGH FREQUENCY REPRODUCTION RELIES ON TWO DAS M-75N COMPRESSION DRIVERS ATTACHED TO A NEW BPS-2912 WAVEGUIDE.

THE THREE CHANNEL, HIGH EFFICIENCY CLASS D AMPLIFIER DESIGN IS EQUIPPED WITH A SWITCH MODE POWER SUPPLY (SMPS) AND A COMPREHENSIVE PROTECTION PACKAGE FOR BOTH THE AMPLIFIER AS WELL AS THE COMPONENTS. CHANNEL ONE POWERS THE LOW FREQUENCY WAY, CHANNEL TWO THE MID-RANGE WITH CHANNEL THREE POWERING THE HIGH FREQUENCY DRIVERS. THE AERO-40A INCORPORATES THE LATEST IN DIGITAL SIGNAL PROCESSORS. BRICK WALL FIR FILTERS PROVIDE PERFECT ALIGNMENT BETWEEN WAYS ACHIEVING EXCEPTIONALLY UNIFORM COVERAGE ALL THE WAY DOWN TO THE CROSSOVER POINT.

TOP-OF-THE-LINE AD/DA CONVERTERS HAVE BEEN EMPLOYED ALLOWING FOR SIGNIFICANT IMPROVEMENTS IN DYNAMICS, LOWER DISTORTION AND ULTRA-LOW NOISE LEVELS. REMOTE MONITORING AND CONTROL IS PROVIDED BY WAY OF DASNET™, THE AUDIO MANAGEMENT APPLICATION FOR DAS POWERED CABINETS AND PROCESSORS WHICH OFFERS USERS INSTANT AND INTUITIVE VIEW OF THE SYSTEM STATUS AS WELL AS CONTROL OVER A RANGE OF PARAMETERS OF A SINGLE CABINET OR A NETWORK OF THEM.

THE AERO-40A HAS BEEN CONSTRUCTED USING BIRCH PLYWOOD AND FINISHED WITH THE ISO-FLEX BLACK PAINT IT OFFERS EXCELLENT PROTECTION AND DURABILITY. THREE INDIVIDUAL ASSEMBLIES COMPRISING THE HIGH FREQUENCY WAVEGUIDE, THE HORN DEVICE FOR THE 8” MID-RANGE AND THE CARRIER FOR THE 12” WOOFER ARE MADE FROM INJECTION MOLDED ALUMINUM AND ATTACHED TO THE FRONT OF THE CABINET. A TWO-PIECE INJECTED ALUMINUM HEAT SINK HOUSING THE AMPLIFIER AND RELATED ELECTRONICS IS ATTACHED TO THE REAR OF THE CABINET. TO PROVIDE BOTH STRENGTH AND RESISTANCE TO CORROSION, STAINLESS STEEL HAS BEEN USED FOR THE FASTENERS AND MAJOR PARTS OF THE NEW RIGGING SYSTEM.

WWW.SOUNDBROKER.COM LINKING BUYERS AND SELLERS TOGETHER SINCE 1997 FOR NEW AND USED PROFESSIONAL AUDIO, LIGHTING, STAGING, PROJECTORS, AND VIDEO EQUIPMENT.