(Celebrating our 27th anniversary linking buyers and sellers)

ID # 65467    CURRENT CATEGORY - MICROPHONES/WIRELESS


For Sale: LECTROSONICS R400A RECEIVER W/ A500RA
[PRICED PER UNIT - NEW FROM MANUFACTURER - CALL FOR AVAILABILITY]
Listing last update on September 22, 2017 - Viewed 57 times

LECTROSONICS R400A RECEIVER W/ A500RA

LECTROSONICS R400A RECEIVER WITH A500RA WHIPS AND POWER SUPPLY.

DESCRIPTION:

  • DIGITAL HYBRID WIRELESS® (U.S. PATENT #7,225,135)
  • SMARTSQUELCH™
  • SMARTDIVERSITY™
  • SMARTTUNE™ FOR AUTO FREQUENCY SELECTION
  • 256 SELECTABLE UHF FREQUENCIES
  • RF-CONTROLLED DIGITAL NOISE FILTERS
  • LOW NOISE, ROBUST RF FRONT END
  • DSP-BASED PILOT TONE
  • GRAPHICS TYPE BACKLIT LCD DISPLAY
  • INDEPENDENT BALANCED XLR AND UNBALANCED 1/4-INCH AUDIO OUTPUTS
  • COMPATIBLITY MODES FOR USE WITH ANALOG TRANSMITTERS

THE R400A IS A HIGH PERFORMANCE, TRIPLE-CONVERSION, FREQUENCY SYNTHESIZED, UHF RECEIVER FULLY COMPATIBLE WITH ALL LECTROSONICS 400 SERIES TRANSMITTERS, AND A NUMBER OF ANALOG MODELS. THE PROPRIETARY AUDIO PROCESSING INCLUDES A DSP (DIGITAL SIGNAL PROCESSOR) FOR VERY LOW DISTORTION AND A SUPERIOR SIGNAL TO NOISE RATIO. THE DSP ELIMINATES A COMPANDOR AND ITS ARTIFACTS TO PROVIDE EXCEPTIONAL AUDIO QUALITY WHEN OPERATING IN ITS NATIVE HYBRID MODE. SPECIAL DSP ALGORITHMS ALSO PROVIDE COMPATIBILITY MODES FOR USE WITH LECTROSONICS 100 AND 200 SERIES ANALOG TRANSMITTERS.

THE R400A FEATURES A POWERFUL MENU-DRIVEN LCD GRAPHIC DISPLAY OPERATED WITH A PUSH-BUTTON SWITCH AND A DUAL FUNCTION ROTARY ENCODER CONTROL AS A CONVENIENT MEANS OF VIEWING AND ALTERING SETTINGS. THE LCD MAIN WINDOW DISPLAYS THE PILOT TONE INDICATOR, DIVERSITY ANTENNA ACTIVITY, RF AND AUDIO LEVELS, OPERATING FREQUENCY, TRANSMITTER FREQUENCY SWITCH SETTINGS AND TRANSMITTER BATTERY STATUS. SETTINGS CAN BE CHANGED USING THE MENU FUNCTIONS. A BUILT-IN RF SPECTRUM ANALYZER IS INCLUDED TO CONDUCT SITE SURVEYS TO FIND INTERFERENCE-FREE OPERATING FREQUENCIES. THE ANALYZER QUICKLY TUNES THE RECEIVER ACROSS ITS 256 FREQUENCIES AND RECORDS A MARKER ON THE LCD INDICATING THE STRENGTH OF ANY RF SIGNALS PICKED UP. WITHIN LESS THAN A MINUTE, A COMPLETE DISPLAY IS GENERATED SHOWING THE RF ACTIVITY ACROSS THE ENTIRE TUNING RANGE OF THE RECEIVER. AN AREA WITH LITTLE OR NO RF ACTIVITY IS THEN EASY TO LOCATE AND SELECT.

 

SEE LECTROSONICS USER GUIDE FOR MORE INFORMATION

BRAND NEW FROM MANUFACTURER WITH FULL FACTORY WARRANTY, FOB NM, USA.

WWW.SOUNDBROKER.COM  LINKING BUYERS AND SELLERS TOGETHER SINCE 1997 FOR NEW AND USED PROFESSIONAL AUDIO, LIGHTING, STAGING, PROJECTORS, AND VIDEO EQUIPMENT.

Additional Details
ID#: 65467
Listing Type:
Standard
Model: R400A
Manufacturer: LECTROSONICS
Condition: MFG A STOCK
Shipping Info: 0.00 lbs.,
Seller's Location: NM, USA
Updated: September 22, 2017
M.S.R.P.: $0.00
Offered at: Contact Us
CONSUMER ALERT

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.

Wireless microphone device that operate in portions of the 617-652 MHz or 663-698 MHz frequencies. Beginning in 2017, these frequencies are being transitioned by the Federal Communications Commission (FCC) to the 600 MHz service to meet increasing demand for wireless broadband services. Users of this device must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies.

Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.

To operate wireless microphone systems at power greater than 50mW, you must qualify as a Part 74 user and be licensed.

NOTE – This has not changed at all and has been in effect for over 20 years. If you qualify and wish to apply for a license go to:

http://www.fcc.gov/Forms/Form601/601.html

Look under BROADCAST AUXILIARY – Land Mobile (Part 74) You will need forms FCC 601 Schedule d and Schedule H

From the FCC docket 10-16 – Page 7 – (boldface has been added by us)

10. Under Section 74.832, only certain entities may be issued licenses authorizing the use of low power auxiliary stations. In particular, these entities fall within the following categories: (1) licensees of AM, FM, TV, or International broadcast stations or low power TV stations; (2) broadcast network entities; (3) certain cable television system operators; (4) motion picture and television program producers as defined in the rules; and (5) certain entities with specified interests in Broadband Radio Service (BRS) and Educational Broadcast Service (EBS) licenses, i.e., BRS licensees (formerly licensees and conditional licensees of stations in the Multipoint Distribution Service and Multi-channel Multipoint Distribution Service), or entities that hold an executed lease agreement with a BRS licensee or conditional licensee or entities that hold an executed lease agreement with an Educational Broadcast Service (formerly Instructional Television Fixed Service) licensee or permittee.25 Cable television operations, motion picture and television program producers may be authorized to operate low power auxiliary stations only in the bands allowed for TV broadcasting.26 All classes of broadcast auxiliary stations provided for in Subpart H, except wireless video assist devices (WVADs), may be operated on a short term basis under the authority conveyed by a Part 73 license or a broadcast auxiliary license without prior authorization, subject to conditions.

To purchase or list using the services of SoundBroker.com, you must be a member of SoundBroker.com and agree to our terms and conditions. If you are a VIP-Loyalty Club Member, please Log In to see your price (unfortunately, due to the nature of the economy, SoundBroker.com does not accept low offers from our Gold Members). Click here for details on becoming a VIP-Loyalty Club Member.

All listings on SoundBroker.com are subject to change &/or cancellation without notice. All items listed are pre-owned and priced per unit unless noted in the description. SoundBroker.com reserves the right to accept or decline any listing or purchase. Due to the contractual agreement we can only sell & ship this item to an address in the United States.