7:44 PM Mar 4th
WELCOME TO SOUNDBROKER.COM
Happy ThanksgivingSoundBroker is closed 29th & 30th
Buy Us a Coffee
ID # 45033 CURRENT CATEGORY - MICROPHONES
RADIAL ENGINEERING TWIN ISO (YOM: 2009) (S#: TBD)
Listing last update on November 07, 2018 - Viewed 215 times
Click on thumbnail to enlarge
Asking Price:
SOLD
RADIAL ENGINEERING TWIN ISO (YOM: 2009) (S#: TBD)
FEATURES: BRAND NEW, NEVER BEEN USED!
• TWO CHANNEL BALANCED LINE ISOLATOR
• JENSEN TRANSFORMER-EQUIPPED
• 100% ISOLATION TO REDUCE GROUND LOOPS
• LINE-LEVEL WITH UP TO 24DB SIGNAL HANDLING
• ULTRA SOLID I-BEAM CONSTRUCTION
THE RADIAL TWIN-ISO IS A BALANCED 2-CHANNEL, LINE-LEVEL ISOLATOR THAT HAS BEEN SPECIFICALLY DEVELOPED FOR PROFESSIONAL TOURING SYSTEMS AS A MEANS TO ELIMINATE HUM AND BUZZ CAUSED BY GROUND LOOPS WHEN INTERFACING VARIOUS EQUIPMENT SUCH AS TWO CONSOLES, REMOTE TOWERS AND DRIVE RACKS.
CENTRAL TO THE TWIN-ISO IS THE USE OF WORLD-RENOWNED JENSEN AUDIO TRANSFORMERS. THESE ASSURE THE VERY BEST SIGNAL TRANSFER WITHOUT DISTORTION CAUSED BY SATURATION OR PHASE SHIFT. ALL CONNECTIONS ARE BALANCED XLR FOLLOWING THE AES STANDARD WITH PIN-1 GROUND AND PIN-2 HOT. TO ADD VERSATILITY, A POLARITY REVERSE SWITCH IS PROVIDED FOR EACH CHANNEL TO ENSURE ABSOLUTE PHASE IS MAINTAINED THROUGHOUT THE AUDIO SIGNAL PATH.
AS WITH ALL RADIAL PRODUCTS, THE RADIAL TWIN-ISO FEATURES A RUGGED 14-GAUGE STEEL CONSTRUCTION FOR MAXIMUM DURABILITY AND TO STAND UP TO THE RIGORS OF PRO-TOURING. THE UNIQUE BOOK-END DESIGN PROVIDES A PROTECTIVE ZONE FOR THE SWITCHES WHILE THE FULL BOTTOM NO-SLIP PAD PROVIDES PLENTY OF ‘STAY-PUT’ FOR MORE ACTIVE STAGES. A UNIQUE SKELETAL DESIGN FEATURES WELDED I-BEAM CONSTRUCTION, MAKING IT IMPOSSIBLE TO TORQUE THE INTERNAL PC BOARD, REDUCING THE OPPORTUNITY FOR COLD SOLDER JOINTS TO DEVELOP DUE TO OUTSIDE STRESS. THIS UNIQUE DESIGN ALSO PERMITS UP TO EIGHT TWIN-ISOS TO BE RACK-MOUNTED USING THE RADIAL J-RAK IN JUST TWO 19” RACK SPACES.
THE RADIAL TWIN-ISO IS A SIMPLE YET EXTREMELY EFFECTIVE TOOL FOR THE PROFESSIONAL AUDIO ENGINEER AND SYSTEM DESIGNER.
EXTRAS: NO EXTRAS.
MODIFICATIONS: NO MODS.
HISTORY: NEVER BEEN USED!
COMMENTS: BRAND NEW!
THIS UNIT WAS NEVER TOURED
PLEASE NOTE: THE SELLER'S ASKING PRICE MAKES THIS LISTING ELIGIBLE FOR OUR VIP-LOYALTY CLUB, DIRECT SALES PROGRAM. IN ORDER TO SAVE YOU MONEY, THIS ITEM CAN ONLY BE PURCHASED AS A VIP MEMBER DIRECTLY FROM THE SELLER.
$ 120.00 IS THE EXACT AMOUNT THE SELLER.
VIP LOYALTY CLUB, DIRECT TO SELLER / DIRECT TO BUYER MEMBERSHIP INCLUDES:
UNLIMITED USE OF THE DIRECT CLUB (THE SMORGASBORD OF SAVINGS)
ALL GOLD MEMBER BENEFITS
3 FREE LISTING UPGRADES TO A PLAN D (VALID FOR TERM OF MEMBERSHIP YEAR)
ABILITY TO MAKE LOWER PRICE OFFERS
EXCLUSIVE DISCOUNT PRICING ON A & B-STOCK, DEMO & REP SAMPLES *
FIRST PRIORITY "GEAR WE NEED" NEWSLETTER AND WEBSITE ACCESS **
NO FEES CHARGED ON YOUR UNDER $2,500.00 DIRECT CLUB LISTINGS
SAVINGS OF $150 OFF SELECTED USED ITEMS PURCHASED DIRECTLY FROM THE SELLER
FREE BANK CHECK OR ACH VENDOR PAYMENTS ($10 SAVINGS)
EXCLUSIVE SPECIALS - ADDITIONAL DISCOUNTS ON SELECTED MANUFACTURER'S
THE ABILITY TO USE OUR ONLINE AND SECURE PERSONALIZED "SHOPPING CART"
PRIORITY RESPONSES TO ALL REQUESTS FOR INFORMATION
ALL YOUR LISTINGS ARE IN BOLD TYPE AND IN FIRST POSITION OF CATEGORY
PRIORITY ACCESS TO SOUNDBROKER.COM'S MOST CURRENT INFORMATION & LISTINGS
DIRECT COMMUNICATION BETWEEN THE BUYER AND SELLER WHEN APPLICABLE
ACCESS TO SOUNDBROKER.COM'S SECURE TRANSACTION SERVICE
SOUNDBROKER.COM'S LOGISTIC SERVICES: DISCOUNTED SHIPPING PRICES, TRACKING, SHIPPING QUOTES
ADVANCE COPY OF WEEKLY NEWSLETTER ON SATURDAY
SOLD PRICE INFORMATION
ADVANCE LISTING NOTIFICATION
PLEASE NOTE AS MEMBERSHIP IN VIP GROWS, THERE WILL BE ADDITIONAL BENEFITS ADDED
* MANUFACTURER'S A-STOCK IS ONLY AVAILABLE TO DOMESTIC USA MEMBERS
** BEST WAY TO FIND WHAT YOU ARE LOOKING FOR VIP WANTED LISTING RUNS FOR 7 DAYS
| Additional Details | |
| ID#: | 45033 |
| Listing Type: | Direct Discount Available |
| Model: | TWIN ISO |
| Manufacturer: | RADIAL ENGINEERING |
| Condition: | UNOPENED BOX - NEVER USED (10) |
| Shipping Info: | 1.00 lbs., |
| Seller's Location: | MD, USA |
| Updated: | November 07, 2018 |
| M.S.R.P.: | $0.00 |
| Asking Price: | SOLD |
|
CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
Wireless microphone device that operate in portions of the 617-652 MHz or 663-698 MHz frequencies. Beginning in 2017, these frequencies are being transitioned by the Federal Communications Commission (FCC) to the 600 MHz service to meet increasing demand for wireless broadband services. Users of this device must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones. |
|
To operate wireless microphone systems at power greater than 50mW, you must qualify as a Part 74 user and be licensed.
NOTE – This has not changed at all and has been in effect for over 20 years. If you qualify and wish to apply for a license go to: http://www.fcc.gov/Forms/Form601/601.html Look under BROADCAST AUXILIARY – Land Mobile (Part 74) You will need forms FCC 601 Schedule d and Schedule H From the FCC docket 10-16 – Page 7 – (boldface has been added by us) 10. Under Section 74.832, only certain entities may be issued licenses authorizing the use of low power auxiliary stations. In particular, these entities fall within the following categories: (1) licensees of AM, FM, TV, or International broadcast stations or low power TV stations; (2) broadcast network entities; (3) certain cable television system operators; (4) motion picture and television program producers as defined in the rules; and (5) certain entities with specified interests in Broadband Radio Service (BRS) and Educational Broadcast Service (EBS) licenses, i.e., BRS licensees (formerly licensees and conditional licensees of stations in the Multipoint Distribution Service and Multi-channel Multipoint Distribution Service), or entities that hold an executed lease agreement with a BRS licensee or conditional licensee or entities that hold an executed lease agreement with an Educational Broadcast Service (formerly Instructional Television Fixed Service) licensee or permittee.25 Cable television operations, motion picture and television program producers may be authorized to operate low power auxiliary stations only in the bands allowed for TV broadcasting.26 All classes of broadcast auxiliary stations provided for in Subpart H, except wireless video assist devices (WVADs), may be operated on a short term basis under the authority conveyed by a Part 73 license or a broadcast auxiliary license without prior authorization, subject to conditions. |
To purchase or list using the services of SoundBroker.com, you must be a
member of SoundBroker.com and agree to our terms and conditions. If you
are a VIP-Loyalty Club Member and feel a listing is priced too high, please
contact us to make a fair counteroffer (unfortunately, due to the nature
of the economy, SoundBroker.com does not accept low offers from our Gold
Members). Click here
for details on becoming a VIP-Loyalty Club Member.
All listings on SoundBroker.com are subject to change &/or cancellation
without notice. All items listed are pre-owned and priced per unit
unless noted in the description. SoundBroker.com reserves the right to
accept or decline any listing or purchase.
